HybridAssistant

Bonjour,

J'utilise HA sur ma prius 4 de 2016 (75000kms) pour mes trajets quotidiens. Autant dire que je connais bien le fonctionnement de HA, et de la voiture.

Mais j'ai remarqué 2 choses bizarres hier :
- le matin, le Soc est passé de 54 à 51% alors que la consommation électrique était négative (de -1kw à-5kw), j'étais en ralentissement dans un faux plat descendant
- le soir, plutôt l'inverse : alors que j'étais arrêté à un feu avec une conso de +0,7kw le Soc est remonté (de 53 à 54%)

Je n'avais jamais constaté de telles anomalies, est ce que cela peut venir du logiciel (erreur de calcul par exemple) ou y aurait-il quelque chose de louche avec la batterie ?

Merci à ceux qui sauront m'aider
 
Bonjour,
A mon avis, tu observes simplement des variations du SoC liées à des changement de température.
 
Merci Priusfan, j'avais jamais remarqué cela jusque là, et hier 2 fois c'est ce qui m'étonne.
Je vais continuer à observer...
 
I use a vlinker mc+ . I do confirm this is the best I ever tested.
Hi dear Priusfan,I already bought a mc+.i tested it with my 2022 Hybrid Levin today,However it doesn't recognize the car model and doesn't work.I need some help, what should I do?
thanks
WechatIMG31.jpegWechatIMG32.jpegWechatIMG33.jpegWechatIMG37.jpegWechatIMG38.jpegWechatIMG39.jpeg
“已经过社区验证”图标
 
It is an unknown model in our countries.

It would surely need some modifications to be recognized, because it's still based on the same engines as the other Toyota models.
 
@future1990
Hi...
it is possible with HA to simulate a known model...

Regarding levin, back in 2018/2019, we met a strange model: the engine was similar to prius 3, but the hybrid system was similar to prius 4...
So we adapted for this...

Can you give some details regarding your model
  • Engine: 1.8L or 2L, type of injection port / direct or both.
  • Hybrid system: similar to Prius4/Corolla or other
  • Battery: NiMh or LiIon.
If you use car scanner, you may get all sort of infos.
Also, you can get the logs from HA. Attach them here and I will have a look...
 
@future1990
Hi...
it is possible with HA to simulate a known model...

Regarding levin, back in 2018/2019, we met a strange model: the engine was similar to prius 3, but the hybrid system was similar to prius 4...
So we adapted for this...

Can you give some details regarding your model
  • Engine: 1.8L or 2L, type of injection port / direct or both.
  • Hybrid system: similar to Prius4/Corolla or other
  • Battery: NiMh or LiIon.
If you use car scanner, you may get all sort of infos.
Also, you can get the logs from HA. Attach them here and I will have a look...
Hi dear priusfan:
Thanks,In China, Levin and Corolla are the same car, but with different shapes.
My 2022 Levin car infos.
  • Engine: 1.8L, 4 four-cylinder manifold injection.
  • Hybrid system: should be similar to Corolla,because Levin and Corolla are the same in china.
  • Battery: NiMh
I have used the car scanner & HA,but I don't know what information is needed.I'm going to read the information and then post.
thank u
 
@future1990
Hi...
it is possible with HA to simulate a known model...

Regarding levin, back in 2018/2019, we met a strange model: the engine was similar to prius 3, but the hybrid system was similar to prius 4...
So we adapted for this...

Can you give some details regarding your model
  • Engine: 1.8L or 2L, type of injection port / direct or both.
  • Hybrid system: similar to Prius4/Corolla or other
  • Battery: NiMh or LiIon.
If you use car scanner, you may get all sort of infos.
Also, you can get the logs from HA. Attach them here and I will have a look...
Sorry,I am not sure the type of injection port/direct.I will get infos by the car scanner or HA.
 
Hi dear priusfan
I read the data by HA & car scanner,but I don't know if it is correct or not, please confirm.
thanks
 

Pièces jointes

  • HA_logs.zip
    19.8 KB · Affichages: 5
  • car scanner1.zip
    1 MB · Affichages: 4
Dernière édition:
Bonjour future1990,
merci de nous rejoindre sur le forum du Prius Touring Club.

Tout d'abord, il faut noter que les Toyota destinées au marché chinois, spnt produite en coopération avec un industriel chinois.
Les références des pièces peuvent être spécifiques au marché chinois. Par exemple, le moteur 1.8L des hybrides est référencé 5ZR-FXE pour les Prius de fabrication chinoise, 2ZR-FXE ailleurs.

Concernant le moteur 1.8l, je n'ai jamis vu de version à injection directe.

Cordialement,

---

deepl翻译:
你好,future1990。

感谢你加入我们普锐斯旅游俱乐部的论坛。


首先,应该指出的是,为中国市场准备的丰田汽车是与一家中国制造商合作生产的。

这些零件编号可能是针对中国市场的。例如,混合动力车的1.8L发动机在中国生产的普锐斯中被称为5ZR-FXE,在其他地方被称为2ZR-FXE。


关于1.8L发动机,我从未见过直喷版本。


真诚的。
 
Hi dear
Thanks,I found out that the engine type is 8ZR-FXE(1.8L),electronic fuel injection.
 
you can try to simulate an older levin or a corolla.
to do this in HA
change the langage to english
and follow these steps:
1) select the wrench (bottom left) to access to the parms
2) select Hybrid Reporter
1675672538510.png

3) in HR, go to menu (3 dots top right)
1675672727252.png

4) select "Database Maintenance"
1675672809810.png
5) on the bottom of this page, where you see bzff,
write exactly BZ3B et select "Set Code"

1675672997720.png
this will force the detection of a corolla 1.8L

and now you test in your car...

you can also test a previous model of Levin, using the code BY80


this method is not easy to use (it was reserved to devs)
 
you can try to simulate an older levin or a corolla.
to do this in HA
change the langage to english
and follow these steps:
1) select the wrench (bottom left) to access to the parms
2) select Hybrid Reporter
Regarde la pièce jointe 8484

3) in HR, go to menu (3 dots top right)
Regarde la pièce jointe 8485

4) select "Database Maintenance"
Regarde la pièce jointe 8486
5) on the bottom of this page, where you see bzff,
write exactly BZ3B et select "Set Code"

Regarde la pièce jointe 8487
this will force the detection of a corolla 1.8L

and now you test in your car...

you can also test a previous model of Levin, using the code BY80


this method is not easy to use (it was reserved to devs)
Thanks,I will try.
 
you can try to simulate an older levin or a corolla.
to do this in HA
change the langage to english
and follow these steps:
1) select the wrench (bottom left) to access to the parms
2) select Hybrid Reporter
Regarde la pièce jointe 8484

3) in HR, go to menu (3 dots top right)
Regarde la pièce jointe 8485

4) select "Database Maintenance"
Regarde la pièce jointe 8486
5) on the bottom of this page, where you see bzff,
write exactly BZ3B et select "Set Code"

Regarde la pièce jointe 8487
this will force the detection of a corolla 1.8L

and now you test in your car...

you can also test a previous model of Levin, using the code BY80


this method is not easy to use (it was reserved to devs)
Hi dear priusfan
I had tested the BZ3B,It's work good,do I need to do something?or Can I keep using it like this?
Thank u very much.
WechatIMG43.jpegWechatIMG44.jpegWechatIMG45.jpegWechatIMG46.jpegWechatIMG47.jpeg
 
Il ne consomme pas beaucoup 3l/100km. :whistle:
 
@future1990
thank you for your feedback...
Fine, I am happy for you.:)
Can I keep using it like this? You can switch back to chinese if you like....
and you can share your experience on FaceBook...
 
@future1990
thank you for your feedback...
Fine, I am happy for you.:)
Can I keep using it like this? You can switch back to chinese if you like....
and you can share your experience on FaceBook...
Dear priusfan, thanks your help to me. I'll share my experience on FaceBook. I have another question: Using the force code on HA with my car,Will it have a bad effect on my car?Besides, does the development team need my feedback on this model?
thanks
 
The force code is only a trick to manage unknown models.
There is absolutely no risk because of this. (unless you look at your phone instead of the road ):velo:

Yes, your feedback may be interesting... after a week from now, from the "data base" window, select "Export" and send us the database.
it will be analysed by Alessandro & myself.
you can contact me by private message (the envelop icon you can see on top right of your screen when you are visiting this website).
 
The force code is only a trick to manage unknown models.
There is absolutely no risk because of this. (unless you look at your phone instead of the road ):velo:

Yes, your feedback may be interesting... after a week from now, from the "data base" window, select "Export" and send us the database.
it will be analysed by Alessandro & myself.
you can contact me by private message (the envelop icon you can see on top right of your screen when you are visiting this website).
Thanks, I got it.
 
Pages vues depuis le 20 Oct 2005: 308,316,983
Retour
Haut Bas